Drive Sweeper
Windows 10 & 11 Buy license · $29.95
Troubleshooting

Disk Cleanup Not Working in Windows 11? How to Fix It

Disk Cleanup not working in Windows 11, stuck on Windows Update Cleanup or not freeing space? Step-by-step fixes and safer ways to clear the space.

Updated 5 minute read The Drive Sweeper team

If Disk Cleanup is not working in Windows 11, the cause is usually one of four things: it is still busy (Windows Update Cleanup can take a long time), it is not running with administrator rights, a pending update or restart is holding files, or Windows system files are damaged. Work through the fixes below in order: wait, restart, run it with Clean up system files, try the same cleanup from Settings, then repair Windows with SFC and DISM. If it runs but frees little space, the space is probably somewhere Disk Cleanup never looks.

Find your symptom below and start there.

Common symptoms and where to start

SymptomMost likely causeStart with
Stuck on "Windows Update Cleanup"Slow component check, not frozenFix 1
Does not open, or closes straight awayDamaged system files or a stuck processFixes 2 and 5
System categories missingNot running as administratorFix 3
Same amount shown after cleaningCleanup finishes after a restart, or the size is reported wronglyFix 4
Runs fine but frees very littleSpace is in your own files, not junkLast section

Fix 1: Give it time

The Windows Update Cleanup step checks every component of Windows to see which old versions can be removed. On a PC with a lot of update history, especially with a hard drive rather than an SSD, that can take 30 minutes or more, and the progress bar may not move for long periods.

  1. Open Task Manager with Ctrl + Shift + Esc.
  2. On the Processes tab, find Disk Space Cleanup Manager for Windows.
  3. If its CPU or disk usage is above zero, it is still working. Leave it for up to an hour.

Only end it if it has shown no activity at all for a long time.

Fix 2: Restart and try again

A restart clears stuck processes and lets Windows finish pending updates, which often holds files that Disk Cleanup wants to remove.

  1. Check Settings > Windows Update. If it says a restart is required, restart now.
  2. After the restart, open Disk Cleanup again before opening other programs.

Use Restart rather than Shut down. With Fast Startup turned on, shutting down does not fully reset Windows.

Fix 3: Run it with administrator rights

When opened normally, Disk Cleanup only shows your own files. The categories that free the most space, such as Windows Update Cleanup and previous Windows installations, need administrator rights.

  1. Open Disk Cleanup from the Start menu and choose drive C:.
  2. Click Clean up system files and approve the prompt.
  3. Choose C: again. The list now includes the system categories.

Alternatively, right-click Start, open Terminal (Admin) and run cleanmgr /d C, then click Clean up system files.

Fix 4: Use Settings instead

Windows 11 has the same cleanup built into Settings, and it is a good workaround if Disk Cleanup itself will not run.

  1. Open Settings > System > Storage > Temporary files.
  2. Wait for the sizes to load.
  3. Tick the categories you want. Leave Downloads unticked unless you really want to empty that folder.
  4. Click Remove files.

If Windows Update Cleanup still shows the same size afterwards, restart the PC. Part of that cleanup is completed during the restart. If the number never changes, compare free space on the drive in File Explorer before and after; the figure shown in the list is not always accurate, and real free space is what counts. Our comparison of Disk Cleanup and Storage Sense explains how the two tools overlap.

Fix 5: Repair Windows and check the drive

If Disk Cleanup crashes, will not open or always fails on the same category, Windows files may be damaged. Two built-in tools repair them.

  1. Right-click Start and choose Terminal (Admin).
  2. Run DISM /Online /Cleanup-Image /RestoreHealth and wait for it to reach 100%. It may pause for a while at certain percentages.
  3. Run sfc /scannow and wait for it to finish.
  4. Restart and try Disk Cleanup again.

Once Windows is healthy, you can also clear old update components directly with DISM /Online /Cleanup-Image /StartComponentCleanup. That is the same job Windows Update Cleanup does, run from the command line. Our article on the WinSxS folder being too large explains what it removes.

Check the drive for errors

File system errors can stop files being deleted.

  1. In File Explorer, right-click the drive and choose Properties.
  2. Open the Tools tab and click Check under Error checking.
  3. Follow the prompts. If it asks to repair at the next restart, restart.

Fix 6: Make a little room first

If the drive is almost completely full, with only a few hundred megabytes left, Disk Cleanup and Windows Update can both struggle, because they need some working space of their own. Make a little room by hand before trying again:

  1. Empty the Recycle Bin.
  2. Move a few large personal files, such as videos from your Videos or Downloads folder, to an external drive.
  3. Uninstall a large app or game you no longer use in Settings > Apps > Installed apps.

With a few gigabytes free, run Disk Cleanup again.

Whatever the symptom, do not try to work around Disk Cleanup by deleting files from C:\Windows, WinSxS, SoftwareDistribution or other system folders by hand. Removing the wrong file can stop updates installing or leave Windows unable to start. Use Disk Cleanup, Settings or DISM, which know what is safe.

When it works but frees almost nothing

Disk Cleanup was designed for Windows junk: temporary files, update leftovers, error reports and the like. On most PCs that adds up to a few gigabytes. If your drive is still full, the space is almost certainly in places Disk Cleanup never looks:

  • Duplicate files and photos in your own folders.
  • Huge forgotten files, such as videos, disk images and old game installers.
  • Old downloads you have not opened in months.
  • Restore points and hibernation, which are system settings rather than junk.

Drive Sweeper covers that ground. Along with Windows temporary files, update leftovers, browser caches and crash dumps, it finds duplicates by comparing content, lists the biggest files on every drive and flags downloads you have not touched in months. A storage map shows which folders are taking the space. Drive Sweeper never picks system files or program folders, every item is labeled safe, review or keep, and removed files stay in a restore area for 30 days.

For a full walk-through of where space goes on a typical PC, see what is taking up space on my C drive.

Frequently asked questions

Why is Disk Cleanup stuck on Windows Update Cleanup?

That step can take a long time because Windows checks every component. Leave it for up to an hour before assuming it is frozen.

Why does Disk Cleanup still show the same amount after cleaning?

Some entries can be reported wrongly and do not reflect real space. Check free space in File Explorer before and after rather than trusting the number in the list.

How do I run Disk Cleanup as administrator?

Open Disk Cleanup and click Clean up system files, or run cleanmgr from an administrator Command Prompt.

Get three guides like this every month, plus software update notices.Subscribe →